Scan Driver Installation Instructions 1) Attach the appropriate communication cable (parallel or USB) from the computer to the WC390. NOTE: If you are connecting the WC390 to the parallel port, make sure that there are no other parallel port devices installed on the PC, if so uninstall them following the instructions provided by their manufacturer. 2) If present, close the "Found New Hardware Wizard" clicking on Cancel. 3) Exit all other applications on the PC prior to installing the driver. 4) Go to www.xerox.com/drivers to download the Scan Driver for Windows XP. 5) Click on the file XP_WC390S.exe 6) Click on OPEN 7) Click on Next 8) Click on Finish