Comments: Before loading the new driver uninstall any previous WC390 Drivers. Please read the instructions before downloading the driver. 1. Turn on the WC390 Printer with an IEEE1284 parallel cable connected. If the "Found New Hardware Wizard" appears, select "Cancel" 2. If your PC has a current driver already installed, go to Start ->All Programs -> Xerox WorkCentre 390 -> and click on Printer Driver Uninstall OR Start -> Control Panel -> Printers and Faxes -> View installed printers and faxes, and delete any WC385 icons by right clicking the Xerox WorkCentre icon, and left clicking delete. 3. On the Xerox Web Site, Select "WC390XPE.exe" the XP English printer driver. 4. Select "Save" at File Download. 5. Select "Desktop" at the "Save in:" dropdown box, then select "Save". 6. Select "Open", when the file download is complete. 7. Select "OK" at Important Install Information. 8. Select "OK" at WinZip Self-Extractor. 9. Close the Web site when finished. 10. Select "Start". 11. Select "Control Panel". 12. Double click on "Printers and Faxes". 13. Select "Add a Printer". 14. At the "Add Printer Wizard" select "Next". 15. Make sure the box "Automatically detect and install my Plug and Play Printers" is checked, select "Next". 16. The "Found New Hardware Wizard" will appear. Under "What do you want the wizard to do?" select "Install from a list or specific location(Advanced), then select "Next". 17. Select "Include this location in the search:" and type "C:\WC390XPE" in the text box below, and select "Next". 18. Select "Continue Anyway" at hardware installation. 19. Select "Finish" at completing the "Found New Hardware Wizard" window. 20. At "Add Printer Wizard" window, select "Yes" for a test page, and select "Next". 21. Select "Finish" at completing the "Add Printer Wizard" window. 22. After test page is completed select "OK" to close the next window. 23. At "Printers and Faxes" folder, make sure there is a black check mark next to the Xerox WorkCentre icon. If there is not, right click the Xerox WorkCentre icon, then left click "Set as Default Printer". 24. Re-booting your PC at this time (after a software installation) is always a good idea. ***If printing to another port besides LPT1, you must change the port by right clicking the Xerox WorkCentre, left click on properties, click the ports tab, and select the correct port.