Web download instruction for all Windows users You MUST run Uninstall if you already have a copy of M940/M950 software installed on your PC. Click Uninstall icon in your Xerox WorkCentre M940/M950 program group to uninstall the software. 1) Download the executable to your local disk. 2) Click "Close" when download completes. 3) Make certain your PC is powered off and your WorkCentre power cord is unplugged. Start your PC and allow Windows to fully load. 4) Locate the file you just downloaded and double click the .exe file. 5) When the WinZip( Self-Extractor dialog displays, click "Setup" button. 6) Files are extracted and the installation begins. 7) Follow the on-screen instructions to install the print drivers and other software. 8) When the software installation is completed, a Setup Finish dialog is displayed. Click Finish to shut down your PC. When your PC is shut down, insert the USB or parallel cable into the back of your PC and into the back of your WorkCentre M940/M950. Insert the power cord into the back of your WorkCentre M940/M950 then restart your PC. Your PC will now finish configuring your system for operation. Please refer to the Reference Guide or User Guide (if supplied) for additional information.