Xerox DocuPrint P8 XP Printer Driver Installation Instructions Comments: Before loading the new driver uninstall any previous DocuPrint P8 Drivers. Please read the instructions before downloading the driver. 1. Turn on the DocuPrint P8 Printer with an IEEE1284 parallel cable connected. If the "New Hardware Wizard" appears, select "Cancel" 2. If you used a Xerox WorkCentre XE80 driver as an emulation for Windows XP. Click Start ->All Programs -> Xerox WorkCentre XE -> and click on Printer Driver Uninstall OR Click Start -> Control Panel -> Printers and other hardware -> View installed printers and Faxes, and delete the printer icon by right clicking the Xerox WorkCentre XE80 icon, and left clicking delete. 3. On the Xerox Web Site, Select "P8XPE.exe" the XP English printer driver. 4. Select "Save" at File Download. 5. Select "Desktop" at the "Save in:" dropdown box, then select "Save". 6. Select "Open", when the file download is complete. 7. Select "OK" at Important Install Information. 8. Select "OK" at WinZip Self-Extractor. 9. Close the Web site when finished. 10. Select "Start". 11. Select "Control Panel". 12. Select "Printers and other hardware". 13. Select "Add a Printer". 14. At the "Add Printer Wizard" select "Next". 15. Make sure the box "Automatically detect and install my Plug and Play Printers" is checked, select "Next". 16. The "Found New Hardware Wizard" will appear, under "What do you want the wizard to do?" select "Install from a list or specific location(Advanced), then select "Next". 17. Select "Include this location in the search:" and type "C:\P8XPE" in the text box below, and select "Next". 18. Select "Continue Anyway" at hardware installation. 19. Select "Finish" at completing the "Found New Hardware Wizard" window. 20. At "Add Printer Wizard" window, select "Yes" for a test page, and select "Next". 21. Select "Finish" at completing the "Add Printer Wizard" window. 22. After test page is completed select "OK" to close the next window. 23. At "Printers and Faxes" folder, make sure there is a black check mark next to the Xerox WorkCentre icon. If there is not, right click the Xerox DocuPrint P8 icon, and left click "Set as Default Printer". ***If printing to another port besides LPT1, you must change the port by right clicking the Xerox DocuPrint P8, left click on properties, click the ports tab, and select the correct port.