Xerox WorkCentre 5735-5790 
version 130.00.0004
Copyright (C) 2010 Xerox Ltd.
All Rights Reserved


Table of Contents
=================

1. Description
2. Features
3. System Requirements
4. Distribution
5. Installation
6. Further Help


1. Description
==============

The Xerox WorkCentre 5735-5790 consists of a suite of tools for performing administrative 
tasks on the Xerox WorkCentre 5735-5790 family of products.  

All the tools connect to the device using a Universal Serial Bus (USB) connection.


2. Features
===========

Auditron Data Save/Restore - A tool for backing up Auditron data and 
accounts, and generating reports from Auditron data held within the device.

Fax Data Save/Restore - A tool for downloading/uploading fax phonebook data
and backing up fax configuration data. 


3. System Requirements
======================

The following minimum configuration is required:

- An IBM Compatible PC running Windows XP (>=SP2), Vista, XP x64, Vista x64 or Windows 7
- A Type A USB port
- A USB A-B cable for connecting PC to device
- A CD-ROM drive or internet connection
- Internet Explorer v4.01 or later

Following installation see the individual help files for additional tool 
specific requirements.


4. Distribution 
===============

This product contains the following key files:

Readme.txt     - Introductory information (this file)
Setup.exe      - Xerox WorkCentre 5735-5790 setup application
XeroxServicePort.inf - USB Driver inf files


5. Installation
===============


5.1 Upgrading from a previous version
-------------------------------------

Remove the Xerox WorkCentre 5735-5790 Utilities

This can be achieved using the Add/Remove program applet within the Windows 
Control Panel.  The application Xerox WorkCentre 5735-5790 Utilities 
should be removed.  For Assistance, see Windows Help.

Run Xerox WorkCentre 5735-5790 Utilities setup

Select Run from the Taskbar Start menu, type the full name of the setup file 
(for example, C:\download\setup.exe), and press the Enter key.  This will start
the setup application.  Follow the prompts and online help to install.

Update the USB Driver

Power up the device, connect the USB cable between the PC and device.  
Open Start->Settings->Control Panel->System->Hardware->Device Manager. 
Locate the Xerox Service Port in the "Network adapters" section, 
right click and select Properties. Select the 
Driver tab and click Update Driver.  Using the Update Wizard, select the new driver file.  
The Driver should now be updated (unless the current version of the driver 
is the latest available in which case no update shall occur).  Power down 
the device.  

NOTE - the USB Driver update procedure varies slightly depending on the OS.  
For help updating the USB Driver, see Windows help.


5.2 New Installation
--------------------

Run Xerox WorkCentre 5735-5790 Utilities setup

Select Run from the Taskbar Start menu, type the full name of the setup file 
(for example, C:\download\setup.exe), and press the Enter key.  This will start
the setup application.  Follow the prompts and online help to install.

Install the USB Driver

Power up the device, connect the USB cable between the PC and device.  
The USB connection on the device is located at the rear top half.  Windows will 
detect the presence of a new USB device and request a driver. Browse to and 
select XeroxServicePort.inf. The driver is now installed.


6. Further Help
===============

For help with using the tools, please see the tools corresponding help file.