
                     Release 4.30.09

To uninstall a previous installation:
	1) Use xpadmin to remove all Xerox print queues.
	2) For Solaris installation, use pkgrm to remove the CTRWxpxx package.
	   For all other installations, remove the "Xerox" installation directory.
	3) Remove /var/spool/Xerox directory.


run setup within the install directory as root to install the driver.

NOTE: setup will expand and install the compressed tar file in the install 
      directory, generate script files and other files that are needed
      at run time. The following syntaxes are supported:
      	1) setup                               <== menu driven install 
      	2) setup tmp_path                      <== menu driven install 
      	3) setup install install_path          <== no menu, just install 
      	4) setup install install_path tmp_path <== no menu, just install
                  install_path is the installation directory which will contain all
                       the Xerox software.
                  tmp_path is a temporary work area. /tmp is the default work area.

	In any of the above syntaxes the no_space_check is also supported
and will disable the check to ensure free space exists in the install and
tmp paths.


******************************************************************************
******************************************************************************
*           ***     IMPORTANT NOTE      ***                                  *
*                                                                            *
*   This is software is only part of a full release to support Xerox         *
*   Printers. Please be sure to also install the PrinterPkgXPXX_2002_03_14   *
*   or newer. This is needed on all installs in order to provide the most    *
*   up to date printer support possible.                                     *
*                                                                            *
******************************************************************************
******************************************************************************



The following tools are provided to support setup and configuring of printer queue management. 

xpadmin - Utility to setup and configure printer lp spool areas as well as
            the Xerox spool areas. xpadmin must be used to setup print 
            queues for this release.

xprint - Command line based print driver that can be installed on a 
          print server and can be used from any remote location or from within
          the print server. It can work with or without an X windows platform. 
          Features provided:
            1 Xerox printer features.
            2 Ability to store feature settings in setting files.
            3 Ability to initiate feature settings using a setting file.
            4 Ability to print using a setting file without user interface. 
          Use xprint in place of lp or lpr when using this driver.
           

lp or lpr or application printing via lp:
          Motif based print driver that is started by lp or lpr. 
          This driver may be installed on each work station or on 
          a print server that will be be used to generate print jobs using 
          the Xerox color features. 
          Single user setup:
             Install this release package each work station that will
             use the Motif based print driver.
          Server setup:
            1 Install this release package on the network print server that 
              will provide the Motif based print driver.
            2 On the network print server, setup a print queue with user 
              interface visibility enabled.
            3 On each print client, setup a print queue that will print to 
              the print server queue.
            The client work station must be running an X windows server.
            Printing may be started from the client or the server work station
            using lp or lpr.


Note: 
  1. All command line utilities will provide syntax help when invoked with
     the utility name only or an invalid syntax.

  2. Copy count should be set using the Xerox print tool. Copy counts that are 
     set within an application may not take effect.
      
  3. To install software successfully, there must be sufficient free swap
     space in your system. The swap space requirement may vary from system
     to system.
   
  4. A printer may not be in the printer display list, if it does not respond 
     before the time out. One or more factors may contribute to the response
     delay, such as processing speed, network traffic, and printer's Network
     Interface Card (NIC).
   
  5. In some system configuration, if you directly login as root, you may
     not be able to use CentreWare in GUI mode. In that situation, you may 
     try Xhost command or login as a superuser using su command.
   
  6. When you print a file from ApplixWare or Acroreader application, a message
     saying "Connection to server unauthorized : Unable to open display" may
     show up in your terminal. In that case, the user interface would not be
     displayed. However, the job would be printed using default features.
   
  7. Processing of graphics files such as TIFF, GIF, JPEG, Raster requires
     write access to the current file system. If you use a 'read only' file
     system, the software may fail.

  8. Printing through a print server to a printer may result in the
     printer-generated banner page reflecting the user name of root rather 
     than the correct user name. Using the banner page in the queue features
     the user name will be printed correctly. 

  9. Requesting multiple images per sheet (Nup) with custom paper sizes will
     be ignored and print as 1 up on custom sizes.  Nup will work on standard
