Comments: Before loading the new driver uninstall any previous XL or XD Drivers. Please read the instructions before downloading the driver. 1. Turn on the XD Printer with IEEE1284 parallel cable directly connected. If the "New Hardware Wizard" appears, select "Cancel" 2. If you installed the XL printer go to Start -> Control Panel -> Printers and other hardware -> View installed printers and Faxes, and delete any XL icons by right clicking on the Xerox WorkCentre icon, and left click delete. If you installed the XD driver, go to Start -> All Programs -> Xerox Workcentre XD -> Uninstall Xerox Workcentre 3. On the Xerox Web Site, Select "XD_XPEnu.exe" the XP English printer driver. 4. Select "Save" at File Download. 5. Select "Desktop" at the "Save in:" dropdown box, then select "Save". 6. Select "Open", when the file download is complete. 7. Select "OK" at Important Install Information. 8. At Install Notepad minimize the instructions window for future reference. 9. Close the Web site when finished. 10. Select "Start". 11. Select "Control Panel". 12. Select "Printers and other hardware". 13. Select "Add a Printer". 14. At the "Add Printer Wizard" select "Next". 15. Make sure the box "Automatically detect and install my Plug and Play Printers" is checked, Select 'Local Printer', and select "Next". 16. The "Found New Hardware Wizard" will appear, under "What do you want the wizard to do?" select "Install from a list or specific location(Advanced), then select "Next". 17. Select "Include this location in the search:" and type "C:\XeroxXD" in the text box below, and select "Next". 18. Select "Continue Anyway" at hardware installation. 19. Select "Finish" at completing the "Found New Hardware Wizard". 20. At Add Printer Wizard, select "Yes" for a test page, and select "Next". 21. Select "Finish" at completing the "Add Printer Wizard". 22. After test page is completed select "OK" 23. At "Printers and Faxes" folder, make sure there is a black check mark next to the Xerox WorkCentre icon. If there is not, right click the Xerox WorkCentre icon, and left click "Set as Default Printer". ***If printing to another port besides LPT1, you must change the port by right clicking the Xerox WorkCentre, left click on properties, click the ports tab, and select the correct port.