Comments: Before loading the new driver, uninstall any previous WorkCentre XE90fx Drivers. Please read the instructions before downloading the driver. 1. Turn on the WorkCentre XE90fx Printer with an IEEE1284 parallel cable connected. If the "New Hardware Wizard" appears, select "Cancel". 2. If your PC has a current driver already installed, Click Start -> All Programs -> Xerox WorkCentre XE90fx -> Uninstall Xerox WorkCentre. If you were previously using a Xerox WorkCentre XL driver, click Start -> Control Panel -> Printers and other hardware -> View installed printers and faxes, and delete the printer icon by right clicking the Xerox WorkCentre icon, and left clicking Delete. 3. On the Xerox Web Site, select "XE90XPE.exe", the XP English printer driver. 4. Select "Save" at File Download. 5. Select "Desktop" at the "Save in:" dropdown box, then select "Save". 6. Select "Open" when the file download is complete. 7. Select "OK" at Important Install Information. 8. Select "OK" at WinZip Self-Extractor. 9. Close the Web site when finished. 10. Select "Start". 11. Select "Control Panel". 12. Select "Printers and other hardware". 13. Select "Add a Printer". 14. At the Add Printer Wizard, select "Next". 15. Select "Local Printer". Make sure the box "Automatically detect and install my Plug and Play Printers" is checked, then select "Next". 16. The Found New Hardware Wizard will appear. Under "What do you want the wizard to do?" select "Install from a list or specific location (Advanced)", then select "Next". 17. Select "Include this location in the search:" and type "C:\XE90XPE" in the text box below, and select "Next". 18. Select "Continue Anyway" at Hardware Installation. 19. Select "Finish" at completing the Found New Hardware Wizard window. 20. At Add Printer Wizard, select "Yes" for a test page, and select "Next". 21. Select "Finish" at completing the Add Printer Wizard window. 22. After test page is completed, select "OK" to close the next window. 23. At the Printers and Faxes folder, make sure there is a black check mark next to the Xerox WorkCentre icon. If there is not, right click the Xerox WorkCentre XE90fx icon, and left click "Set as Default Printer". ***If printing to another port besides LPT1, you must change the port by right clicking the Xerox WorkCentre XE90fx, left click on properties, click the ports tab, and select the correct port. To install TextBridge Pro (OCR scanning software): 1. Insert the CD-ROM that came with your printer. 2. Click Start -> My Computer. 3. Select your CD-ROM Drive and open it. 4. Double click on the "TXTBridg" folder. 5. Double click on "Setup". 6. Select language. 7. Select "Install Text Bridge Pro 8.0". 8. Follow on-screen Instructions.