DiagLpt.exe Parallel Port Diagnostic Program This diagnostic program allows us to examine the current operating status of your PC parallel port and optimize the scanner connectivity. We ask that you carefully read and follow the instructions below. Instructions 1) Download the two files (DiagLpt.exe and GETLPTI.vxd) to the Temp folder on the C: drive. Make sure that both files are in the Temp folder. 2) Open the temp folder by double clicking on it. 3) Ensure that the Xi70c is on and “READY TO COPY” is displayed in the control panel LCD. If the Xi70c is in sleep mode (lamp is off) press any button to initialize it. Also check that it is connected to your PC with the IEEE 1284 cable supplied with it. 4) Locate DiagLpt.exe in your C:\Temp folder and double click on it to run the diagnostic tool. 5) Locate the “Test Scan on LPT1” button on the diagnostic program window and run it. A check of the parallel port’s operational modes is now performed. 6) Once the parallel ports have been checked, “Update Parameters” button will be enabled. Click on the button and test scanner from MGI Photo Suite or Pagis Pro.