Xerox ColorQube(TM) 9301-9303 Utilities version 180.00.0001 Copyright (C) 2011 Xerox Ltd. All Rights Reserved Table of Contents: ============== 1. Description 2. Features 3. System Requirements 4. Distribution 5. Installation 6. Further Help 1. Description ============== The Xerox ColorQube(TM) 9301-9303 Utilities consists of a suite of tools for performing administrative tasks on the Xerox ColorQube(TM) 9301-9303 family of products. All the tools connect to the device using a Universal Serial Bus (USB) connection. 2. Features =========== Fax Data Save/Restore - A tool for downloading/uploading fax phonebook data and backing up fax configuration data. 3. System Requirements ====================== The following minimum configuration is required: - An IBM Compatible PC running Windows XP (>=SP2), Vista, XP x64, Vista x64 or Windows 7 - A Type A USB port - A USB A-B cable for connecting PC to device - A CD-ROM drive or internet connection - Internet Explorer v4.01 or later Following installation see the individual help files for additional tool specific requirements. 4. Distribution =============== This product contains the following key files: Readme.txt - Introductory information (this file) Setup.exe - Xerox ColorQube(TM) 9301-9303 Utilities setup application XeroxServicePort.inf - USB Driver inf file 5. Installation =============== 5.1 Upgrading from a previous version ------------------------------------- Remove the Xerox ColorQube(TM) 9301-9303 Utilities This can be achieved using the Add/Remove program applet within the Windows Control Panel. The application Xerox ColorQube(TM) 9301-9303 Utilities should be removed. For Assistance, see Windows Help. Run Xerox ColorQube(TM) 9301-9303 Utilities setup Select Run from the Taskbar Start menu, type the full name of the setup file (for example, C:\download\setup.exe), and press the Enter key. This will start the setup application. Follow the prompts and online help to install. 5.2 New Installation -------------------- Run Xerox ColorQube(TM) 9301-9303 Utilities setup Select Run from the Taskbar Start menu, type the full name of the setup file (for example, C:\download\setup.exe), and press the Enter key. This will start the setup application. Follow the prompts and online help to install. Install the USB Driver Power up the device, connect the USB cable between the PC and device. The USB connection on the device is located at the rear top half. Windows will detect the presence of a new USB device and request a driver. Browse to and select XeroxServicePort.inf. The driver is now installed. 6. Further Help =============== For help with using the tools, please see the tools corresponding help file.