Xerox WorkCentre 450c XP Printer Driver Installation Instructions *********************************************************** Removal of any 450c drivers prior to this installation is recommended. If the "Found New Hardware" window appears at any point in this installation, click on "cancel". *********************************************************** 1. Select the link to download the driver form the Xerox web page. Select the "Run this program from it's current location" radio button, then click on OK to copy the files to your PC. Close the browser program (I.E. Internet Explorer). 2. Click on "Start", then click "Control Panel", then click "Printers and Other Hardware", then click "Add a printer". 3. After the "Add Printer Wizard" window appears, click "Next". (If "Found New Hardware" window appears click on "cancel") 4. Select "Local printer attached to this computer", uncheck the "Automatically detect and install my plug and Play printer" box if it is checked then click "Next". 5. Click "Next" (to select LPT1 as the printer port to be used). 6. Click "Have Disk". 7. Click "Browse" and click on the down arrow to the right of "Look in:", select "Local disk (C:)", then select "xrx450c", click "Open" (or the folder you directed the driver files to be copied to), select the file xDPCXJM and then click "Open". 8. Click "OK" (to accept the path displayed). 9. Select your printer from the list and click "Next". 10. If the "Use Existing Driver" screen appears, select "Replace existing driver" then click "Next". Click "Next" (to accept the name and make this your default printer). 11. Click "Next" (to automatically print a test print). 12. Click "Finish".