Xerox WorkCentre 490cx Windows XP Printer/Scanner(Twain)/Firmware Installation Instructions *** Important *** It is suggested that you uninstall any previous versions of the driver for the device you are installing before installing a new driver. Note: LaserFax is not supported by Windows XP *** Caution*** If the "Found New Hardware Wizard" for this device should appear before or during installation click Cancel. To Prevent "Found New Hardware Wizard" from appearing after installation WARNING Do not insert installation CD 1. In Found New Hardware Wizard click "Next". 2. Make sure that "Don’t Prompt again to install this software" is Checked this should be the default condition. 3. Select "Finish" 4. Select "Cancel" to close Help & Support Center. 5. Select "Finish" Printer driver/Scanner(Twain) driver Installation Instruction 1. It is recommend that you exit all Windows Applications before running Setup program. 2. Attach the appropriate communication cable (parallel or USB) from the printer to the computer. 3. Click on the Driver file. The File Download Application will open. 4. In the File Download Application Select "OPEN" to start the Self- Extractor. 5. Read Instructions from the WinZip Self-Extractor. 6. In the WinZip Self-Extractor select "Setup" to download. 7. Read instruction from the InstallShield installer. 8. Select "Next" to install Drivers. Wait for installation to take place. 9. Follow on screen directions. 10. Select "Finish" to complete setup and to restart your PC. Firmware Download Instruction Note: Do not remove Power during firmware download. 1. It is recommend that you exit all Windows Applications before running Setup program. 2. Attached the appropriate communication cable (parallel or USB) from the printer to the computer. 3. Click on the Driver file. The File Download Application will open. 4. In the File Download Application Select "OPEN" to start the Self- Extractor. 5. Read Instructions from the WinZip Self-Extractor. 6. In the WinZip Self-Extractor select "Setup" to download. 7. Select "Verify Information" 8. To Upgrade select "Upgrade Now" 9. Follow on screen directions.